【通达信指标】久跌倍量阳指标公式，久旱逢甘霖，低吸有肉吃（副图+选股）

第一部分 指标介绍

1.通达信久跌倍量阳副图指标，以长期缩量阴跌或超跌个股为主要预警监测一根反转的倍量大阳线为信号点，通过对量能，股价和趋势线的关系进行预警。

2.用法上大阳的信号往往是个天量的涨停板，若当天买不进去可选择第二天择机低吸，这样安全性更高，若不是涨停板涨幅在7个点一下也可当天上车，止损点设置在-5或大阳的最低点或近期的低点都可，只要持续放量交投活跃就可一直持股，抓到一支真龙就能吹一年了。

3.指标不含未来函数，指标不漂移。

第二部分 公式源码

{久跌倍量阳--副图}

JDPL1:=DMA((((HIGH + LOW) + (CLOSE * 2)) / 4),0.9);

JDPL2:=REF(EMA(JDPL1,3),1);

JDPL3:=(VOL / (((HIGH - LOW) * 2) - ABS((CLOSE - OPEN))));

JDPL4:=(IF((CLOSE > OPEN),(JDPL3 * (HIGH - LOW)),IF((CLOSE < OPEN),(JDPL3 * ((HIGH - OPEN) + (CLOSE - LOW))),(VOL / 2))) + IF((CLOSE > OPEN),(0 - (JDPL3 * ((HIGH - CLOSE) + (OPEN - LOW)))),IF((CLOSE < OPEN),(0 - (JDPL3 * (HIGH - LOW))),(0 - (VOL / 2)))));

DRAWTEXT_FIX(1,0,0.07,0,微信公众号：万物狙击),COLORMAGENTA,LINETHICK4;

JDPL5:= V<=LLV(V,100)*3;

JDPL6:=COUNT(JDPL5,5)>=3;

JDPL7:= VOL>=REF(V,1)*1.9 AND C>O;

JDPL8:=REF(JDPL6,1) AND JDPL7;

JDPL9:=COUNT(C>O,5)>=2 AND COUNT(C<O,5)>=2;

JDPL10:=REF(C,1); 涨幅:=(C-JDPL10)*100/JDPL10;

限制条件:= NAMELIKE(ST) OR NAMELIKE(*) OR CODELIKE(3) OR BARSCOUNT(V)<=200 OR DYNAINFO(9)=0;{WWW.GUSHICHANGHONG.COM}

久跌倍量阳:=COUNT(JDPL8,1)>=1 AND REF(JDPL9,1) AND 涨幅>5 AND 限制条件=0 AND REF(KDJ.D<30,1);

DRAWICON(久跌倍量阳,0.1,1);

DRAWICON(久跌倍量阳,0.3,9);

DRAWICON(久跌倍量阳,0.5,17);

DRAWICON(久跌倍量阳,0.7,29);

DRAWICON(久跌倍量阳,0.9,30);

DRAWICON(久跌倍量阳,1,18);

STICKLINE(久跌倍量阳,0,1,0,0),COLOR00FFFF;

第三部分 选股公式

{久跌倍量阳--选股}

XGG1:=DMA((((HIGH + LOW)+(CLOSE * 2)) / 4),0.9);

XGG2:=REF(EMA(XGG1,3),1);

XGG3:=(VOL / (((HIGH - LOW)*2)-ABS((C-O))));

XGG4:=(IF((CLOSE > OPEN),(XGG3 * (HIGH - LOW)),IF((CLOSE < OPEN),(XGG3 * ((HIGH - OPEN) + (C-L))),(VOL/2)))+IF((C>O),(0-(XGG3*((H-CLOSE)+(OPEN-LOW)))),IF((C<O),(0-(XGG3*(H-L))),(0-(VOL/2)))));

XGG5:= V<=LLV(V,100)*3;

XGG6:=COUNT(XGG5,5)>=3;

XGG7:= VOL>=REF(V,1)*1.9 AND C>O;

XGG8:=REF(XGG6,1) AND XGG7;

XGG9:=COUNT(C>O,5)>=2 AND COUNT(C<O,5)>=2;

XGG10:=REF(C,1); 涨幅:=(C-XGG10)*100/XGG10;

限制条件:= NAMELIKE(ST) OR NAMELIKE(*) OR CODELIKE(3) OR BARSCOUNT(V)<=200 OR DYNAINFO(9)=0;{WWW.GUSHICHANGHONG.COM}

久跌倍量阳X:COUNT(XGG8,1)>=1 AND REF(XGG9,1) AND 涨幅>5 AND 限制条件=0 AND REF(KDJ.D<30,1);

第四部分 指标图示

很赞哦！ (1)